Page 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of
Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR SUBURBAN/ YUKON
XL THIRD SEAT FLOOR LINERS
OVERLAPS RIGHT LINER
YOUR LINER. REMOVE THE SHADED PORTION SHOWN ABOVE. A UTILITY KNIFE WORKS WELL FOR TRIMMING.
FRONT OF VEHICLE
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER
SIDE
NOTICE: LEFT LINER
IF YOUR SUBURBAN OR YUKON XL IS EQUIPPED WITH THE 60/40 SPLIT SECOND SEAT, YOU MAY NEED TO TRIM
7270.DOC
Rev: 0
02/01/01
Loading...