Husky Liners 7201 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FRONT OF VEHICLE

ACCESS TO THE THIRD ROW OF SEATS. ONCE THIS IS DONE, THE LINER CAN BE INSTALLED
AND THE SECOND ROW OF SEATS CAN BE LOCKED BACK INTO THE “USE” POSITION.

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new

floor liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR TRAILBLAZER EXT

AND ENVOY XL SECOND SEAT FLOOR LINERS

BEFORE INSTALLING YOUR LINER YOU WILL NEED TO UNLATCH AND FLIP FORWARD BOTH OF
THE SECOND ROW SEATS. FOLLOW THE SAME PROCEDURES USED TO ALLOW PASSENGERS

7201.doc
Rev: 0

06/20/02