
7144 Installation Ins#C2931.doc
07/07/06
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place
of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your
new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR 2ND ROW BENCH SEAT EQUIPPED
SUBURBAN/YUKON XL/CADILLAC ESV THIRD SEAT FLOOR LINER
PLEASE NOTE THAT THIS LINER IS DESIGNED FOR VEHICLES WITH 2ND ROW BENCH SEATING. IT
WILL NOT WORK IN APPLICATIONS WITH 2ND ROW BUCKET SEATING. IF YOU HAVE NOT
RECEIVED PART #7144, YOU HAVE THE WRONG LINER. PLEASE CONTACT YOUR RETAILER OR
HUSKY LINERS AT 800-344-8759.
NOTE THAT THE DIAGRAM ABOVE SHOWS THREE (3) AREAS DARKENED. YOUR LINER SHOULD
HAVE THREE (3) PRE-TRIMMED HOLES IN THE SAME AREAS TO ALLOW THE SECOND ROW
SEATS TO FASTEN THROUGH THE LINER. IF YOUR LINER DOES NOT HAVE THESE THREE AREAS
TRIMMED, DO NOT INSTALL THE LINER. INSTEAD, PLEASE CALL HUSKY LINERS AT 800-344-8759.
TO ALLOW INSTALLATION OF YOUR NEW LINER, YOU MUST FIRST FLIP/FOLD BOTH OF YOUR
2ND ROW SEATS FORWARD. ONCE LINER IS INSTALLED, YOU CAN FLIP/FOLD YOUR 2ND ROW
SEATS INTO THE NORMAL USE POSITION. CHECK SEATS TO MAKE SURE THEY ARE SECURELY
LOCKED INTO PLACE BEFORE OPERATING VEHICLE.