Husky Liners 7065 User Manual

7065.doc

03/31/2006

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new

floor liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR JEEP COMMANDER

THIRD SEAT FLOOR LINER

TO INSTALL YOUR THIRD SEAT LINER, FIRST FLIP/TUMBLE BOTH SECOND ROW SEATS
FORWARD. YOUR LINER CAN THEN BE EASILY INSTALLED. NOTE THAT THE TWO “TONGUE”
PORTIONS OF THE LINER WILL BE UNDER THE SECOND SEATS WHEN SECOND SEATS ARE
LATCHED BACK INTO PLACE.