Page 1
6922.doc
10/05/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR MERCEDES
ML-350/500 SECOND SEAT FLOOR LINERS
NOTICE: LEFT LINER
OVERLAPS RIGHT LINER
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
FRONT OF VEHICLE
MERCEDES BENZ HAS LOCATED CARGO TIE DOWN HOOKS IN THE SECOND ROW FLOOR PANS. SHOULD
YOU WISH TO ACCESS THESE CARGO TIE DOWN HOOKS WITH YOUR LINERS IN PLACE, SIMPLY TRIM
AWAY THE MATERIAL FROM THE LOWERED AREAS ON YOUR LINERS SITUATED ABOVE THESE HOOKS
(SHOWN ABOVE HATCHED). A UTILITY KNIFE WORKS WELL FOR TRIMMING.
Loading...