6661.doc
02/24/2004
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest way
to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor
All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR NISSAN TITAN
KING CAB (EXTENDED CAB) TRUCK SECOND SEAT LINER
TO EASE INSTALLATION, POSTION FRONT SEATS TO THEIR MOST FORWARD POSTION AND FOLD REAR
SEATS UP. IF YOUR TITAN HAS A CONSOLE BETWEEN THE FRONT SEATS, YOU WILL NEED TO TRIM AWAY
A PORTION OF YOUR LINER TO ACHIEVE THE PROPER FIT. TRIM YOUR LINER AS SHOWN ABOVE (SEE
SHADED AREA). A TRIM GUIDE IS MOLDED INTO YOUR LINER TO AID TRIMMING; TRIM ALONG THE
RECESSED LINE. A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING.
FRONT OF VEHICLE
DRIVER’S SIDE
LINER
PASSENGER’S SIDE
LINER
NOTE: DRIVER’S SIDE LINER
OVERLAPS PASSENGER’S SIDE
Loading...