Page 1
6628.doc
05/17/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR NISSAN XTERRA
SECOND SEAT FLOOR LINER
TO EASE INSTALLATION, ADJUST BOTH FRONT SEATS TO THEIR MOST FORWARD POSITION. WHEN
LINER IS INSTALLED, REPOSITION SEATS AS REQUIRED.
THIS LINER IS DESIGNED FOR THE NEW BODY STYLE XTERRA THAT WENT INTO PRODUCTION IN 2005.
FOR 2004 AND OLDER XTERRA’S USE HUSKY LINER PART #6650. IF YOU HAVE RECEIVED THE WRONG
PART, JUST CONTACT YOUR RETAILER OR CALL HUSKY LINERS AT 800-344-8759.
FRONT OF VEHICLE
Loading...