Husky Liners 6550 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of
Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA

T-100 SECOND SEAT LINER

FRONT OF VEHICLE

LEFT OR

DRIVER’S SIDE

IF YOUR T-100 IS EQUIPPED WITH A CENTER CONSOLE, IT WILL BE NECESSARY TO TRIM YOUR
LINER AS SHOWN ABOVE. A UTILITY KNIFE OR SCISSORS WORK WELL FOR TRIMMING.

RIGHT OR

PASSENGER’S SIDE

6550.doc
Rev: 0

03/20/02