Husky Liners 6509 User Manual

6509.doc

03/15/2006

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new

floor liner. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well.

Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR PONITAC VIBE/

TOYOTA MATRIX SECOND SEAT FLOOR LINERS

TO EASE INSTALLATION OF LINERS, MOVE BOTH FRONT SEATS TO THEIR MOST FORWARD
POSITION BEFORE INSTALLING LINERS. ONCE LINERS ARE IN PLACE, ADJUST FRONT SEATS TO
DESIRED POSTIION.

FRONT

OF

VEHICLE

LEFT OR

DRIVER’S

SIDE

RIGHT OR

PASSENGER’S

SIDE

NOTICE: RIGHT LINER
OVERLAPS LEFT LINER