Husky Liners 6377 User Manual

6377.doc
12/28/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well.
Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR FORD EXPLORER
SECOND SEAT FLOOR LINER
LEFT OR
DRIVER’S SIDE
RIGHT OR
PASSENGER’S SIDE
FRONT OF VEHICLE
NOTE: PASSENGER’S SIDE LINER OVERLAPS DRIVER’S
NOTE: TO ACHIEVE THE CORRECT FIT FOR EXPLORERS EQUIPPED WITH SECOND ROW BUCKET SEATS/SECOND ROW CONSOLE, SIMPLY TRIM AWAY THE MATERIAL FROM THE LOWER PORTION OF THE LINER THAT COVERS THE CENTER HUMP (SEE HATCHED AREA ABOVE). USE THE MOLDED IN TRIM GROOVE AS A GUIDE. A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING. SEE PHOTOS ON BACK SIDE OF PAGE.
6377.doc
12/28/2005