Page 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR FORD
RANGER/MAZDA B-SERIES TRUCK SECOND SEAT LINER
IF YOUR TRUCK IS EQUIPPED WITH A CENTER CONSOLE YOU WILL NEED TO TRIM YOUR
HUSKY LINER, REMOVING THE AREA ABOVE THE HORIZONTAL BAND AS SHOWN ABOVE.
FOLLOW THE TRIM LINE ETCHED ON THE PART A UTILITY KNIFE OR HEAVY SHEARS WORK
WELL FOR TRIMMING.
6372.DOC
Rev: 0
02/01/01
Loading...