Husky Liners 6331 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of
Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR FORD F-150

AND F-250 LT. DUTY TRUCK SECOND SEAT FLOOR LINER

FRONT OF VEHICLE

LEFT OR

DRIVER’S

SIDE

NOTICE: LEFT LINER
OVERLAPS RIGHT LINER

ON VEHICLES EQUIPPED WITH A CENTER CONSOLE IT WILL BE NECESSARY TO TRIM AWAY A PORTION
OF THE LINER AS SHOWN ABOVE. TRIM ALONG THE SRIBED LINE. A UTILITY KNIFE OR SCISSORS WORK
WELL FOR TRIMMING.

RIGHT OR

PASSENGER’S

SIDE

6331.DOC
Rev: 0

02/01/01