Husky Liners 6315FR User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the
place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before
installing your new floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable.

The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass
Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products

make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR FORD

ESCAPE/MAZDA TRIBUTE SECOND SEAT FLOOR LINER

THE FORD ESCAPE AND MAZDA TRIBUTE COME EQUIPPED WITH TWO STYLES OF
CENTER CONSOLES (SEE PHOTOS ON BACK). YOUR HUSKY LINER WILL
ACCOMMODATE BOTH CONSOLE STYLES BUT SOME TRIMMING MAY BE REQUIRED.
TEST FIT YOUR LINER TO DETERMINE IF YOUR LINER NEEDS TRIMMED. IF TRIMMING IS
NECESSARY, IT IS EASILY DONE BY TRIMMING ALONG THE INSIDE THE RAISED BAND
ON OF THE LINER (SEE ABOVE). AN ADDITIONAL TRIM AREA IS PROVIDED TO
ACCOMMODATE THE POWER SEAT TRACK MOVEMENT ON THE OPTIONAL DRIVER’S
SIDE POWER SEAT (CIRCLED ABOVE). TRIM THE RECESSED PORTION OF THE WALL
AWAY USING A UTILITY KNIFE OR HEAVY SHEARS. ADDITIONAL PHOTOS ARE
INCLUDED ON THE BACK OF THIS INSTRUCTION SHEET TO AID IN TRIMMING.

FRONT OF VEHICLE

6315FR~1.DOC

PHOTOS OF HUSKY LINER #6315 SHOWING CONSOLE STYLES AND

TRIMMING (WHERE APPLICABLE)

POWER SEAT EQUIPPED MODELS

LONG CONSOLE

SHORT CONSOLE

WITH LONG CONSOLE

6315 SHOWN TRIMMED FOR USE WITH

6315 SHOWN IN VEHICLE WITH THE

6315 SHOWN TRIMMED FOR USE

6315 SHOWN IN VEHICLE WITH THE

6315FR~1.DOC