Husky Liners 6306 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FRONT OF VEHICLE

OVERLAPS DRIVER’S SIDE LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners.

However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest way
to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor
All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR FORD F-150 SUPER CREW

LEFT OR

DRIVER’S SIDE

RIGHT OR

PASSENGER’S SIDE

NOTICE: PASSENGER SIDE LINER

HARLEY-DAVIDSON AND KING RANCH EDITION SECOND SEAT LINER

BEFORE INSTALLING YOUR LINERS, ADJUST THE DRIVER’S SIDE SEAT TO ITS MOST FORWARD POSITION.
THIS WILL ALLOW THE SEAT RAILS TO CLEAR THE FRONT LIP OF THE LINER AS THE SEAT TRAVELS BACK. IF
THE SEAT IS NOT COMPLETELY FORWARD, THE LINER WILL NOT GO UNDER THE SEAT TRACKS. INSTALL THE
DRIVER’S SIDE LINER FIRST AS THE PASSENGER SIDE LINER WILL OVERLAP IT.

6306.DOC
Rev: 1

04/19/01