Husky Liners 6192 User Manual

6192 front and back.doc

09/20/00

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new

floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of

Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET

IMPALA/PONTIAC GRAND PRIX SECOND SEAT FLOOR LINER

LEFT OR

DRIVER’S SIDE

RIGHT OR

PASSENGER’S SIDE

FRONT OF VEHICLE

NOTICE: LEFT LINER
OVERLAPS RIGHT LINER

SOME PONITAC GRAND PRIX’S HAVE A CENTER CONSOLE
THAT WILL INTERFERE WITH THE PORTION OF THE LINER
DESIGNED TO COVER THE VEHICLE’S “HUMP” AREA. THIS
PORTION CAN BE EASILY TRIMMED AWAY USING A
UTILITY KNIFE OR HEAVY SHEARS. TRIM ALONG THE STEP
MOLDED INTO THE DRIVER’S SIDE “HUMP” WALL LEAVING
THE TOP OF THE STEP AS A “LIP.” SEE DIAGRAM AT RIGHT.
PHOTOS OF A TRIMMED PART ARE ON SHOWN ON THE
BACK OF THIS INSTRUCTION SHEET.