Husky Liners 6148 User Manual

6148 Front and Back.doc

04/20/2004

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new

floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well.

Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET AVALANCHE &

CADILLAC ESCALADE EXT SECOND SEAT FLOOR LINERS

SOME 2004 MODEL YEAR AVALANCHE/ESCALADE EXT’S ARE EQUIPPED WITH A CENTER CONSOLE
BETWEEN THE FRONT BUCKET SEATS. THIS CONSOLE EXTENDS INTO THE SECOND SEAT FLOOR PAN
AND AT FIRST GLANCE MAY APPEAR TO KEEP YOUR HUSKY LINER FROM FITTING. TO ACHIEVE THE
PROPER FIT FROM YOUR HUSKY LINER IN CONSOLE EQUIPPED VEHICLES, JUST TRIM AWAY THE
MATERIAL ON THE CENTER HUMP PORTION OF YOUR LINER AS DEMONSTRATED ABOVE (ALSO SEE
PHOTOS ON THE REVERSE SIDE). A TRIM GROOVE IS MOLDED INTO THE LINER TO USE AS A TRIMMING
GUIDE.

FRONT OF VEHICLE

LEFT OR

DRIVER’S

SIDE

RIGHT OR

PASSENGER’S

SIDE

NOTICE: RIGHT LINER
OVERLAPS LEFT LINER

6148 Front and Back.doc

04/20/2004

PHOTOS OF PART #6148 TRIMMED

FOR USE IN VEHICLES WITH A CENTER CONSOLE