Husky Liners 6133 User Manual

6133.doc

06/29/2005

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the

place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before

installing your new floor liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable.

The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass

Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products

make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR HUMMER H3

SECOND SEAT FLOOR LINERS

TO EASE INSTALLATION OF LINER, POSITION FRONT SEATS TO THEIR MOST FORWARD
POSITIONS. ONCE LINER IS INSTALLED, REPOSITION SEATS AS DESIRED.

LEFT OR

DRIVER’S SIDE

LINER

RIGHT OR

PASSENGER’S

SIDE LINER

FRONT OF VEHICLE