Husky Liners 6121 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest way

to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor
All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR 2-DOOR

TAHOE/YUKON SECOND SEAT FLOOR LINER

*SOME VEHICLES MAY REQUIRE TRIMMING THE PASSENGER SIDE MAT AS SHOWN ABOVE TO

ACCOMMODATE A SEAT MOUNT BRACKET. A UTILITY KNIFE WORKS WELL.

6121.DOC
Rev: 0

02/01/01