THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest way
to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor
All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR EXTENDED CAB
GMC/CHEVROLET TRUCK SECOND SEAT LINERS
FRONT OF VEHICLE
LEFT OR
DRIVER’S
SIDE
ON VEHICLES EQUIPPED
WITH A CENTER CONSOLE IT
WILL BE NECESSARY TO
TRIM YOUR LINER AS SHOWN
ABOVE. USE THE EDGE OF
THE RAISED BAND AS A
TRIMMING GUIDE. A UTILITY
KNIFE WORKS WELL.
RIGHT OR
PASSENGER’S
SIDE
NOTICE: LEFT LINER
OVERLAPS RIGHT LINER
6110.DOC
Rev: 0
02/01/01
Loading...