Husky Liners 6081 User Manual

6081.doc

12/06/2005

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place

of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your

new floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR DODGE RAM

SECOND SEAT FLOOR LINERS

NOTE: IF YOUR DODGE RAM QUAD CAB TRUCK HAS FRONT BUCKET SEATS WITH THE
CONSOLE OPTION, YOU WILL NEED TO TRIM YOUR LINER AS SHOWN ABOVE (SEE HATCHED
AREA). TRIM ALONG THE BACK EDGE OF THE RAISED RIB (LEAVING THE RAISED RIB
ATTACHED TO THE PART) AND THEY FOLLOWING THE MOLDED GROOVE DOWN THE HUMP. A
UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING.

LEFT OR

DRIVER’S

SIDE

RIGHT OR

PASSENGER’S

SIDE

FRONT OF VEHICLE

NOTICE: PASSENGER SIDE LINER

OVERLAPS DRIVER’S SIDE