Page 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
REAR OF VEHICLE
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR DODGE
DURANGO THIRD SEAT FLOOR LINER
TO INSTALL YOUR HUSKY THIRD SEAT DURANGO LINER #6079, JUST FOLLOW THE
INSTRUCTIONS BELOW. FIRST, POSITION THE THIRD SEAT IN ITS NORMAL PASSENGER USE
POSITION. SECOND, FLIP FORWARD THE SECOND SEAT SIDES THAT ALLOW ACCESS TO THE
THIRD SEAT. NOW YOU CAN EASILY INSTALL YOUR LINER. ONCE YOU HAVE THE LINER
INSTALLED, JUST FLIP THE SECOND SEAT SIDES DOWN. THIS WILL COVER A PORTION OF THE
LINER ON EACH SIDE.
6079.DOC
Rev: 0
11/22/00
Loading...