Page 1
6065
10/13/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of
Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR JEEP COMMANDER
SECOND SEAT FLOOR LINER
JEEP COMMANDER OWNERS WHOSE VEHICLE ARE EQUIPPED WITH THE FACTORY DVD PLAYER
(ELECTRONIC INFOTAINMENT SYSTEM) WILL NEED TO TRIM THE CENTER HUMP PORTION OF
THEIR DRIVER’S SIDE LINER TO ACCOMMODATE THIS OPTION. TRIM YOUR LINER AS SHOWN
ABOVE USING THE MOLDED IN GROOVE AS A GUIDE (SEE PHOTOS ON BACK). A UTILITY KNIFE
OR SCISSORS WORK WELL FOR TRIMMING.
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
NOTICE: RIGHT LINER
OVERLAPS LEFT LINER
Loading...