Husky Liners 6037 User Manual

6037.doc

10/10/2005

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new

floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well.

Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR DODGE DAKOTA

CLUB CAB SECOND SEAT FLOOR LINERS

TO EASE INSTALLATION OF YOUR SECOND SEAT LINERS, POSITION BOTH FRONT SEATS TO THEIR MOST
FORWARD POSITION BEFORE INSTALLING. ONCE LINERS ARE INSTALLED, REPOSITION SEATS AS
NEEDED. NOTE THAT CUSTOMERS WITH THE FACTORY CENTER CONSOLE WILL NEED TO TRIM THEIR
DRIVER’S SIDE LINER TO ACHIEVE THE PROPER FIT. BEFORE TRIMMING, FIRST TEST FIT THE LINERS TO
DETERMINE IF TRIMMING NEEDED. IF TRIMMING IS NECESSARY, USE A UTILITY KNIFE OR HEAVY
SHEARS AND FOLLOW THE MOLDED IN TRIM GROOVE TO REMOVE THE TRIM AREA LOCATED ON THE
CENTER HUMP COVER PORTION OF THE DRIVER’S SIDE LINER (SEE DRAWING ABOVE).

FRONT OF VEHICLE

LEFT OR

DRIVER’S

SIDE

RIGHT OR

PASSENGER’S

SIDE

NOTICE: RIGHT LINER
OVERLAPS LEFT LINER