THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely
unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your
vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In
colder climates this “relaxing” may take longer; moving the liner inside will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well.
Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR VOLKSWAGEN
BEETLE CARGO LINER
ON VEHICLES THAT ARE EQUIPPED WITH THE OPTIONAL FACTORY CD CHANGER, YOUR CARGO LINER
WILL NEED TO BE TRIMMED BEFORE INSTALLATION. TRIM THROUGH THE CENTER OF THE RAISED RIB
AND STRAIGHT OUT THE WALL OF THE PART REMOVING THE RECTANGULAR SECTION AS ILLUSTRATED
ABOVE. THE LINER IS NOW READY FOR INSTALLATION AND WILL FIT AROUND THE CD CHANGER. A
UTILITY KNIFE OR HEAVY SCISSORS WORK WELL FOR TRIMMING.
4931.DOC
Rev: 0
02/01/01
Loading...