4191.doc
04/11/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR BUICK TERRAZA/
CHEVROLET UPLANDER/PONTIAC MONTANA SV6/ SATURN
RELAY CARGO LINER
THIS LINER WILL WORK IN VANS WITH OR WITHOUT THE REMOVABLE REAR CARGO
CENTER. IN VEHICLES WITH THE “REAR CARGO CENTER”, THE LINER SITS ATOP THIS
OPTION. YOU MUST REMOVE THE LINER TO ACCESS THE STORAGE COMPARTMENTS.
YOU CAN ACCESS THE FACTORY CARGO TIE-DOWN HOOKS IN VEHICLES
WITHOUT THE “REAR CARGO CENTER”. SIMPLY TRIM THE MATERIAL
ABOVE THE RECESSED AREAS LOCATED ABOVE THE TIE-DOWN HOOKS.
THESE AREAS ARE CIRCLED ON THIS TOP VIEW.
Loading...