Husky Liners 3655 User Manual

3655

02/02/04

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your Nissan Murano. The liner is made to take the place

of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before

installing your new floor liner . However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable.

The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass

Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products

make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR NISSAN

MURANO FRONT FLOOR LINERS

TO INSURE THE PROPER FIT OF YOUR DRIVER’S SIDE LINER, PLEASE REMOVE THE
FACTORY INSTALLED CARPET HOOKS. THE HOOKS CAN BE EASILY REMOVED BY
GENTLY PULLING THE HOOK UP AND BACK TOWARD THE MOUNTING HOLE. THIS WILL
ALLOW THE HOOKS TO “POP” OUT. SIMPLY STORE THE REMOVED HOOKS IN YOUR
GLOVE BOX OR CONSOLE SHOULD YOU NEED TO REPLACE THEM AT A LATER DATE.

LEFT OR

DRIVER’S

SIDE LINER

RIGHT OR

PASSENGER’S

SIDE LINER