Husky Liners 3595 User Manual

3595 Front_Back.doc

02/02/04

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your

new floor liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR 2004 AND

NEWER TOYOTA RAV-4 FRONT FLOOR LINERS

TO ACCESS THE REMOTE FUEL DOOR RELEASE LEVER WITH YOUR DRIVER’S SIDE LINER IN
PLACE, JUST TRIM AWAY THE MATERIAL FROM THE LOWERED AREA ON YOUR LINER
(SHOWN ABOVE DARKENED). YOU MAY CHOOSE NOT TO TRIM YOUR LINER AND IF SO, YOU
CAN ACCESS THE LEVER BY JUST LIFTING THE LINER. A PHOTO OF THE TRIMMED LINER IS
ON THE BACK OF THIS PAGE.

LEFT OR

DRIVER’S SIDE

RIGHT OR

PASSENGER’S SIDE

3595 Front_Back.doc

02/02/04

HUSKY LINER PART #3595 SHOWN TRIMMED TO

ACCESS THE FUEL DOOR RELEASE LEVER