THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the
place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before
installing your new floor liner. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass
Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products
make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA
TUNDRA AND SEQUOIA FRONT FLOOR LINERS
LEFT OR
DRIVER’S
SIDE LINER
THE FACTORY CARPET HOOK LOCATED IN THE CARPET OF THE DRIVER’S SIDE FLOOR
CAN EASILY BE REMOVED TO ALLOW YOUR LINER TO LAY COMPLETELY FLAT. APPLY
FIRM PRESSURE WHILE TIPPING THE HOOK ARM STRAIGHT UP.
RIGHT OR
PASSENGER’S
SIDE LINER
3555.DOC
Rev: 0
02/08/01
Loading...