Page 1
3549.doc
01/28/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your
new floor liner . However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA
TACOMA TRUCK FRONT FLOOR LINERS
TO INSURE PROPER FIT OF YOUR DRIVER’S SIDE LINER, PLEASE REMOVE THE FACTORY
CARPET HOOKS. THIS IS EASILY DONE BY PULLING THE L-SHAPED HOOK DIRECTLY TOWARD
THE MOUNTING HOLE. THIS WILL ALLOW THE HOOK TO “POP” OUT. THE HOOKS CAN BE
STORED IN YOUR GLOVE BOX FOR REPLACEMENT AT A LATER DATE.
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
Loading...