Page 1
3505.doc
03/11/204
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your
new floor liner. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA SIENNA
FRONT FLOOR LINERS
TO INSURE PROPER FIT OF YOUR DRIVER’S SIDE LINER, REMOVE THE TWO FACTORY CARPET
HOOKS BEFORE INSTALLING YOUR LINER. THE CARPET HOOKS ARE EASILY REMOVED BY
SIMPLY PULLING UP ON THE HOOK END. THE CARPET HOOKS WILL SNAP FREE FROM THE
GROMMETS AND CAN BE STORED IN THE GLOVE BOX OR CONSOLE SHOULD YOU NEED TO
REPLACE THEM AT A LATER DATE.
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
Loading...