3403.doc
07/11/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your
new floor liner. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR SUBARU
OUTBACK/LEGACY
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
YOUR HUSKY LINER CAN EASILY BE TRIMMED TO ALLOW ACCESS TO THE FUEL DOOR RELEASE LEVER
WITHOUT REMOVING YOUR LINER (FUEL RELEASE LEVER NOT USED ON ALL MODELS). TO ALLOW
ACCESS, SIMPLY TRIM LINER USING THE MOLDED TRIM GROOVE AS A GUIDE. LEAVE THE _” LIP AS
DEMONSTRATED ABOVE.
Loading...