Page 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of
Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR
CHEVROLET /GMC FULL SIZE TRUCK
LEFT OR
DRIVER’S SIDE
IF YOUR VEHICLE IS EQUIPPED WITH A MANUAL TRANSFER CASE SHIFTER, YOU WILL NEED TO
TRIM YOUR DRIVER’S SIDE LINER BEFORE INSTALLATION (SEE DIAGRAM ABOVE). USING A
UTILITY KNIFE OR SCISSORS, CAREFULLY REMOVE THE RECESSED PORTION OF THE LINER
WALL. ONCE TRIMMED, YOUR LINER WILL CONTOUR THE SHIFTER HOUSING
RIGHT OR
PASSENGER’S SIDE
3220.DOC
Rev: 0
02/01/01
Loading...