Husky Liners 3126 User Manual

3126.doc

09/27/2004

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your

new floor liner . However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR CADILLAC SRX

FRONT LINERS (VEHICLES WITH ALL WHEEL DRIVE)

.

IF YOUR SRX DOES NOT HAVE ALL WHEEL DRIVE, YOU NEED HUSKY LINER PART #3125
WHICH WILL ACCOMMODATE THE WIDER PASSENGER SIDE FRONT FLOOR PAN. CONTACT
YOUR DEALER FOR THIS PART OR CONTACT US AT 800-344-8759

LEFT OR

DRIVER’S

SIDE

RIGHT OR

PASSENGER’S

SIDE