Husky Liners 3006 User Manual

3006

04/11/2005

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your

new floor liner. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work

well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR DODGE

MAGNUM/CHRYSLER 300 FRONT FLOOR LINERS

ALL WHEEL DRIVE MODELS ONLY

LEFT OR

DRIVER’S

SIDE

RIGHT OR

PASSENGER’S

SIDE

USE PART #3005 FOR VEHICLES WITH REAR WHEEL DRIVE. CONTACT YOUR RETAILER OR
CALL HUSKY LINERS AT 800-344-8759 IF YOU HAVE RECEIVED THE INCORRECT PARTS.