Husky Liners 2921 User Manual

2921.doc

06/12/2005

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely

unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your

vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In

colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.

Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well.

Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR MERCEDES ML-350/500

CARGO LINER--FITS BETWEEN INTERIOR CARGO RAILS

YOUR LINER IS DESIGNED FOR VEHICLES EQUIPPED WITH THE FACTORY CARGO RAILS/CARGO
MANAGEMENT SYSTEM. THE LINER SHOULD BE POSITIONED BETWEEN THE CARGO RAILS. IF YOU NEED
A CARGO LINER THAT WILL WORK WITHOUT THE CARGO RAILS/CARGO MANAGEMENT SYSTEM, OR
WITH THESE COMPONENTS IN THEIR “STORED POSITION UNDER THE CARGO FLOOR, YOU NEED OUR
PART #2922.