Husky Liners 2740 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your
new floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR LAND

ROVER DISCOVERY SERIES II CARGO LINER

LAND ROVER DISCOVERY SERIES II OWNERS WITH REAR
JUMP SEATS MUST REMOVE THE MATERIAL FROM INSIDE
THE RAISED BANDS (SHOWN HERE CROSSHATCHED) PRIOR
TO SEAT USAGE TO ALLOW THE SEATS TO ATTACH TO THE
FLOOR. TO ACCESS THE FACTORY CARGO TIE-DOWN HOOKS,
YOU MUST MAKE A SLIT THROUGH THE RAISED ACCESS
AREAS (DARKENED LOCATIONS ON DRAWING) AND PULL
THE HOOKS THROUGH THE MAT.

2740.DOC
Rev: 1

01/31/01