Husky Liners 2655 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new liner is custom molded to fit your Murano. Upon removal from the box your liner will not completely

unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with

a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this

“relaxing” may take longer; moving the liner inside will speed up the process.

Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor

All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR

NISSAN MURANO CARGO LINER

TO ACCESS THE FACTORY CARGO TIE DOWN HOOKS
LOCATED ON THE CARGO FLOOR, SIMPLY TRIM AWAY
THE MATERIAL FROM THE RECESSED AREAS IN THE
RAISED BOSSES COVERING THE HOOKS (SHOWN ABOVE
DARKENED). A UTILITY KNIFE WORKS WELL FOR
TRIMMING.

TO ACCESS THE FACTORY SECOND SEAT RELEASE
HANDLES WITH YOUR LINERS IN PLACE, SIMPLY TRIM
THE MATERIAL AWAY FROM THE TWO RECESSED
AREAS IN THE WALL OF THE LINER (SHOWN CIRCLED).
A UTILITY KNIFE WORKS WELL FOR TRIMMING.

2655instr.doc

05/12/03