Husky Liners 25951 User Manual

2595 Installation Ins#D0141.doc

06/14/2006

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely

unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle

with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder

climates this “relaxing” may take longer; moving the liner to a heated area will accelerate the process.

Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use

of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR

TOYOTA FJ CRUISER

YOUR HUSKY LINER IS DESIGNED TO ACCOMMODATE SEVERAL FACTORY OPTIONS
AVAILABLE ON YOUR FJ CRUISER. SOME TRIMMING IS INVOLVED IN ACCESSING THESE
OPTIONS. PLEASE SEE PHOTOS ON BACK OF THIS PAGE FOR TRIMMING INSTRUCTIONS. A
UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING.

2595 Installation Ins#D0141.doc

06/14/2006

PHOTO OF LINER TRIMMED FOR FACTORY

ACCESSING POWER POINT

PHOTO OF LINER TRIMMED TO ACCESS FACTORY

CARGO TIE-DOWN HOOK LOCATION.

SOME FJ CRUISERS HAVE A CARGO STORAGE NET
ATTACHED TO THE REAR CARGO DOOR. WE HAVE
PROVIDED AN OPTIONAL TRIM THAT WILL LOWER THE
REAR WALL AND ALLOW FULL USEAGE OF THE
STORAGE NET. TO TRIM, USE A UTILITY KNIFE OR
HEAVY SHEARS AND REMOVE THE UPPER PORTION OF
THE REAR WALL USING STEP AS A TRIM GUIDE