Page 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING.
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely
unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle
with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder
climates this “relaxing” may take longer; moving the liner to a heated area will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use
of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR
LEXUS GX 470 CARGO LINER
TO USE YOUR THIRD ROW FOLD DOWN SEATS WITH YOUR CARGO LINER IN PLACE, JUST TRIM AWAY
THE MATERIAL FROM INSIDE OF THE FOUR (4) AREAS SHOWN ABOVE DARKENED (THESE AREAS ARE
SURROUNDED BY RAISED BANDS). USE THE INSIDE EDGE OF THE BANDS AS A TRIMMING GUIDE.
IF YOU WISH TO ACCESS THE FACTORY CARGO HOOK TIE DOWN LOCATIONS IN YOUR GX470 WITH
YOUR CARGO LINER IN PLACE, TRIM AWAY THE MATERIAL FROM INSIDE OF THE LOWERED AREAS
OF THE (4) SMALL RECTANGULAR AREAS SHOWN ABOVE CROSSHATCHED.
2577.doc
02/26/03
Loading...