Husky Liners 2410 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely
unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle
with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder
climates this “relaxing” may take longer; moving the liner to a heated area will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use
of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR ISUZU

TROOPER/ ACURA SLX CARGO LINER

TO ACCESS THE FACTORY CARGO HOOK TIE DOWN
LOCATIONS IN YOUR CARGO LINER YOU MUST
FIRST MAKE A SLIT IN THE FOUR (4) RAISED AREAS
ON YOUR LINER (SHOWN HERE CROSS HATCHED).
THEN, PUSH THE HOOK RINGS UP THROUGH THE
LINER. TO ACCESS THE FACTORY EQUIPPED CHILD
SAFETY SEAT THIRD POINT TETHERING HOOKS;
TRIM AWAY THE 2 AREAS SHOWN ABOVE CIRCLED.

2410.doc
Rev: 0

03/19/02