Husky Liners 2390 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor liner. However, do not remove the factory-installed carpeting. Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner
slick.
INSTALLATION INSTRUCTIONS FOR YOUR FORD
EXCURSION CARGO LINER
TO UTILIZE THE CARGO TIE-DOWN HOOKS IN YOUR VEHCILE, YOU MUST MAKE A SLIT VERTICALLY THROUGH THE CENTERS OF THE FOUR (4) RAISED ACCESS AREAS ON YOUR MAT (SHOWN HERE DARKENED). THEN, PUSH THE HOOKS THROUGH THE SLITS.
2390.DOC Rev: 0
01/31/01
Loading...