Page 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
MOLDED HERE
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR FORD
EXPEDITION/LINCOLN NAVIGATOR CARGO LINER
IF YOU HAVE A 1997-2002 MODEL YEAR VEHICLE, THIS PART WILL NOT
FIT. YOU NEED OUR MODEL #2345 FOR VEHICLES WITHOUT REAR AIR
OR MODEL #2346 FOR VEHICLES EQUIPPED WITH REAR AIR
PART NUMBER
THIS PART IS DESIGNED TO FIT BEHIND THE THIRD SEAT OF 2003 AND NEWER FORD
EXPEDITIONS AND LINCOLN NAVIGATORS. HUSKY CARGO LINER MODEL #2356 IS AVAILABLE
AND WILL FIT TO THE BACK OF THE SECOND SEATS OF THESE VEHICLES.
2355.doc
Rev: 0
06/05/02
Loading...