Husky Liners 2317 User Manual

2317.doc

05/26/2004

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not

completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back

of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain

flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.

Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well.

Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR FORD

ESCAPE/MAZDA TRIBUTE CARGO LINER

TO ACCESS THE FACTORY CARGO TIE-DOWN HOOKS WITH YOUR LINER IN PLACE, MAKE A
VERTICAL SLIT ACROSS THE MIDDLE OF THE FOUR (4) RAISED AREAS SHOWN HERE CIRCLED.
ONCE THIS IS COMPLETED, PUSH/PULL THE HOOKS UP THROUGH THE LINER.