Husky Liners 2210 User Manual

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll
and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a weight
in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this “relaxing”
may take longer; moving the liner to a heated area will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor
All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET

BLAZER/GMC YUKON CARGO LINER

IF YOUR BLAZER/YUKON IS EQUIPPED WITH AN INSIDE MOUNTED
SPARE TIRE, YOU WILL NEED TO REMOVE THE SPARE BEFORE
INSTALLING YOUR LINER. ONCE YOU HAVE REMOVED THE TIRE,
POSITION THE LINER IN YOUR VEHICLE THEN RE-INSTALL YOUR
SPARE TIRE. CONSULT YOUR OWNERS MANUAL IF YOU HAVE ANY
QUESTIONS ON REMOVING/RE-INSTALLING YOUR SPARE TIRE.

2210.DOC
Rev: 0

01/26/01