THANK YOU FOR SELECTING A HUSKY FLOOR LINER
HOOKS OR CHILD SAFETY SEAT TETHERING
POINTS WITH YOUR LINER IN PLACE, MAKE A SLIT
IN THE FIVE RAISED AREAS ON YOUR LINER
(SHOWN HERE DARKENED). THEN, PULL THE
HOOKS UP THROUGH THE SLIT IN THE LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR
TRAILBLAZER/BRAVADA/ENVOY CARGO LINER
TO ACCESS THE FACTORY CARGO TIE-DOWN
2200.DOC
Rev: 0
04/19/01
Loading...