Page 1
2143 Instruction Sheet.doc
07/03/06
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll
and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a
weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this
“relaxing” may take longer; moving the liner to a heated area will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor
All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET
SUBURBAN/GMC YUKON XL/CADILLAC ESCALADE ESV
YOU CAN ACCESS THE FACTORY CARGO HOOK TIE DOWN
LOCATIONS WITH YOUR LINER IN PLACE. TO DO SO, FIRST MAKE
A SLIT ACROSS THE TWO (2) RAISED AREAS ON YOUR LINER
(SHOWN HERE DARKENED & CIRCLED). THEN, PUSH THE LOOPS
UP THROUGH LINER.
Loading...