Husky Liners 2139 User Manual

2139.doc
09/16/02

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not

completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in

the back of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your

liner will remain flat. In colder climates this “relaxing” may take longer; moving the liner inside will

speed up the process.

Your liner is manufactured using an engineering resin that is lightweight and extremely tough and

durable. The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or

Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these

products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET HHR

CARGO LINER

NOTE: CARGO LINER PART #2139 IS DESIGNED TO FIT IN YOUR HHR WITH THE ADJUSTABLE
CARGO SHELF IN ITS LOWERED POSITION.

TO ACCESS YOUR HHR’S FRONT CARGO TIE-DOWN HOOKS
WITH YOUR LINER IN PLACE, SIMPLY MAKE A HORIZONTAL
SLIT ACROSS THE CENTER OF THE TWO RAISED BANDS (ONE
EACH SIDE, SHOWN ABOVE CIRCLED). THEN, PUSH/PULL THE
CARGO TIE-DOWN HOOKS UP THROUGH THE SLITS.

TO ACCESS THE REAR CARGO TIE-DOWN HOOKS WITH YOUR
LINER IN PLACE, SIMPLY TRIM AWAY THE MATERIAL FROM
THE TWO RECESSED AREAS ALONG THE BACK WALL (SHOWN
BELOW HATCHED). A UTILITY KNIFE WILL WORK WELL FOR
TRIMMING.