Page 1
2132.doc
06/23/2005
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR
HUMMER H3 CARGO LINER
YOU CAN ACCESS THE FACTORY CARGO TIE-DOWN HOOKS
IN YOUR H3 WITH YOUR LINER IN PLACE. TO DO SO, SIMPLY
TRIM AWAY THE TOPS OF THE RAISED AREAS LOCATED
ABOVE THE TIE-DOWN HOOKS. TRIM AWAY THE LOWERED
PORTION OF THE TOP SURFACE. THE FOUR (4) TRIM AREAS
ARE SHOWN HERE DARKENED.
Loading...