Page 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
THROUGH THE STAMPED HOLE PROVIDED.
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR JEEP
WRANGLER CARGO LINER
NOTICE: TO ACCESS THE OUTER SEAT BELTS WITH YOUR
HUSKY LINER IN PLACE, SOME WRANGLERS MODELS MAY
REQUIRE THE LINER TO BE TRIMMED. THIS WILL ALLOW
THE SEAT BELTS TO PASS THROUGH THE LINER. REMOVE
THE AREAS ON YOUR MAT SHOWN DARKENED BELOW. A
UTILITY KNIFE WORKS WILL FOR TRIMMING.
THE CENTER SEAT BELTS WILL NEED TO BE PULLED UP
2075
Rev: 0
01/26/01
Loading...