Husky Liners 2053 User Manual
2053 Front_Back.doc
12/1/2006
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR JEEP
WRANGLER UNLIMITED CARGO LINER
NOTICE: IF YOUR WRANGLER UNLIMITED HAS THE
OPTIONAL INFINITI SOUND SYSTEM, IT HAS A SUBWOOFER MOUNTED ALONG THE PASSENGER SIDE
WALL IN THE CARGO AREA. THIS SUB-WOOFER WILL
KEEP PART #2053 FROM FITTING AS IT WAS BOXED.
HOWEVER, YOUR LINER CAN EASILY BE TRIMMED TO
ACCOMMODATE THIS FEATURE. TO TRIM, CUT ALONG
THE EDGE OF THE MOLDED STEP THAT RUNS ALONG
THE RAISED RIDGE IN THE PART. TRIMMING WILL
LEAVE A _” LIP ALONG THE WALL (SEE BACK OF PAGE
FOR TRIMMING PHOTO).
2053 Front_Back.doc
12/1/2006
TRIM ALONG THE OFFSET EDGE MOLDED INTO YOUR LINER (SEE ARROWS).
Loading...